[PATCH v2] net: axinet: Use of_property_read_u32 instead of open-coding it
DORMANTno replies
REVIEWED: 1 (0M)
From: Tobias Klauser <tklauser@distanz.ch>
Date: 2015-09-23 07:21:07
Also in:
linux-arm-kernel, lkml
Subsystem:
networking drivers, the rest, xilinx axi ethernet driver · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Radhey Shyam Pandey
1 review trailer.
Use of_property_read_u32 instead of of_get_property with return value checks and endianness conversion. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Sören Brinkmann <redacted> --- v2: Resending with Cc to netdev drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 2a5a168..507bbb0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c@@ -129,7 +129,6 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) { int ret; u32 clk_div, host_clock; - u32 *property_p; struct mii_bus *bus; struct resource res; struct device_node *np1;
@@ -168,8 +167,7 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) clk_div = DEFAULT_CLOCK_DIVISOR; goto issue; } - property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL); - if (!property_p) { + if (of_property_read_u32(np1, "clock-frequency", &host_clock)) { netdev_warn(lp->ndev, "clock-frequency property not found.\n"); netdev_warn(lp->ndev, "Setting MDIO clock divisor to default %d\n",
@@ -179,7 +177,6 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) goto issue; } - host_clock = be32_to_cpup(property_p); clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; /* If there is any remainder from the division of * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
--
2.5.0