[PATCH net-next 3/3] l2tp: remove references to modprobe in documentation
flat view
STALE4047d
From: Stephen Hemminger <stephen@networkplumber.org>
Date: 2015-09-24 04:34:51
No longer need explicit modprobe's and update to use ip instead of deprecated ifconfig command. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
--- a/Documentation/networking/l2tp.txt 2015-05-21 15:13:01.421115881 -0700
+++ b/Documentation/networking/l2tp.txt 2015-09-07 12:18:07.672921513 -0700@@ -213,15 +213,12 @@ To create an L2TPv3 ethernet pseudowire and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the tunnel endpoints:- -# modprobe l2tp_eth -# modprobe l2tp_netlink - # ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \ udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2 # ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1 -# ifconfig -a +# ip -s -d show dev l2tpeth0 # ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0 -# ifconfig l2tpeth0 up +# ip li set dev l2tpeth0 up Choose IP addresses to be the address of a local IP interface and that of the remote system. The IP addresses of the l2tpeth0 interface can be