[PATCH 1/6] net: mvneta: Fix CPU_MAP registers initialisation
flat view
STALE4124d
From: Maxime Ripard <hidden>
Date: 2015-07-03 14:30:06
Also in:
lkml
Subsystem:
marvell mvneta ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The CPU_MAP register is duplicated for each CPUs at different addresses,
each instance being at a different address.
However, the code so far was using CONFIG_NR_CPUS to initialise the CPU_MAP
registers for each registers, while the SoCs embed at most 4 CPUs.
This is especially an issue with multi_v7_defconfig, where CONFIG_NR_CPUS
is currently set to 16, resulting in writes to registers that are not
CPU_MAP.
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Maxime Ripard <redacted>
Cc: <stable@kernel.org> # v3.8+
---
drivers/net/ethernet/marvell/mvneta.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index ce5f7f9cff06..b7717375ec4d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c@@ -948,7 +948,7 @@ static void mvneta_defaults_set(struct mvneta_port *pp) /* Set CPU queue access map - all CPUs have access to all RX * queues and to all TX queues */ - for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) + for_each_present_cpu(cpu) mvreg_write(pp, MVNETA_CPU_MAP(cpu), (MVNETA_CPU_RXQ_ACCESS_ALL_MASK | MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
--
2.4.5