[net-next 14/14] igb: Fix i354 88E1112 PHY on RCC boards using AutoMediaDetect
From: Jeff Kirsher <hidden>
Date: 2015-07-17 14:25:37
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Todd Fujinaka <redacted> e1000_check_for_link_media_swap() checks PHY page 0 for copper and PHY page 1 for "other" (fiber) link. The switch back from page 1 to page 0 happened too soon, before e1000_check_for_link_82575() is executed, and link on fiber (other) was never detected. Check for link while still on the proper PHY page. Signed-off-by: Todd Fujinaka <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/igb/e1000_82575.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index b0182dd..d192569 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c@@ -139,10 +139,6 @@ static s32 igb_check_for_link_media_swap(struct e1000_hw *hw) if (ret_val) return ret_val; - /* reset page to 0 */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); - if (ret_val) - return ret_val; if (data & E1000_M88E1112_STATUS_LINK) port = E1000_MEDIA_PORT_OTHER;
@@ -151,8 +147,20 @@ static s32 igb_check_for_link_media_swap(struct e1000_hw *hw) if (port && (hw->dev_spec._82575.media_port != port)) { hw->dev_spec._82575.media_port = port; hw->dev_spec._82575.media_changed = true; + } + + if (port == E1000_MEDIA_PORT_COPPER) { + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + igb_check_for_link_82575(hw); } else { - ret_val = igb_check_for_link_82575(hw); + igb_check_for_link_82575(hw); + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; } return 0;
--
2.4.3