[net-next 8/9] e1000e: fix unit hang during loopback test
From: Jeff Kirsher <hidden>
Date: 2015-06-03 11:28:07
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Yanir Lubetkin <redacted> System would hang during execution of "ethtool -t <NIC>" for the same reason that required flushing the descriptor rings. This fix disables MULR for the loopback test to avoid the hang state. Signed-off-by: Yanir Lubetkin <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/e1000e/ethtool.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 11f486e..c62f0db 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c@@ -1516,8 +1516,19 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter) static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - u32 rctl; - + u32 rctl, fext_nvm11, tarc0; + + if (hw->mac.type == e1000_pch_spt) { + fext_nvm11 = er32(FEXTNVM11); + fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX; + ew32(FEXTNVM11, fext_nvm11); + tarc0 = er32(TARC(0)); + /* clear bits 28 & 29 (control of MULR concurrent requests) */ + tarc0 &= 0xcfffffff; + /* set bit 29 (value of MULR requests is now 2) */ + tarc0 |= 0x20000000; + ew32(TARC(0), tarc0); + } if (hw->phy.media_type == e1000_media_type_fiber || hw->phy.media_type == e1000_media_type_internal_serdes) { switch (hw->mac.type) {
@@ -1542,7 +1553,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) static void e1000_loopback_cleanup(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - u32 rctl; + u32 rctl, fext_nvm11, tarc0; u16 phy_reg; rctl = er32(RCTL);
@@ -1550,6 +1561,16 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) ew32(RCTL, rctl); switch (hw->mac.type) { + case e1000_pch_spt: + fext_nvm11 = er32(FEXTNVM11); + fext_nvm11 &= ~E1000_FEXTNVM11_DISABLE_MULR_FIX; + ew32(FEXTNVM11, fext_nvm11); + tarc0 = er32(TARC(0)); + /* clear bits 28 & 29 (control of MULR concurrent requests) */ + /* set bit 29 (value of MULR requests is now 0) */ + tarc0 &= 0xcfffffff; + ew32(TARC(0), tarc0); + /* fall through */ case e1000_80003es2lan: if (hw->phy.media_type == e1000_media_type_fiber || hw->phy.media_type == e1000_media_type_internal_serdes) {
--
2.1.0