[net-next 2/9] e1000e: i219 execute unit hang fix on every reset or power state transition
From: Jeff Kirsher <hidden>
Date: 2015-06-03 11:28:00
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Yanir Lubetkin <redacted> After testing various cases, the conclusion is that the fix MUST be executed BEFORE any event that the HW is reset or transition to D3. To fix that I moved the execution to the relevant places but per Alexander Duyck's review, ensure now that the DMA is valid and was not freed before manipulating the ring. Signed-off-by: Yanir Lubetkin <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 76b1a90..14ee6a6 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c@@ -4043,6 +4043,8 @@ void e1000e_reset(struct e1000_adapter *adapter) } } + if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw);
@@ -4215,10 +4217,6 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) spin_unlock(&adapter->stats64_lock); e1000e_flush_descriptors(adapter); - if (hw->mac.type == e1000_pch_spt) - e1000_flush_desc_rings(adapter); - e1000_clean_tx_ring(adapter->tx_ring); - e1000_clean_rx_ring(adapter->rx_ring); adapter->link_speed = 0; adapter->link_duplex = 0;
@@ -4229,8 +4227,14 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) e1000_lv_jumbo_workaround_ich8lan(hw, false)) e_dbg("failed to disable jumbo frame workaround mode\n"); - if (reset && !pci_channel_offline(adapter->pdev)) - e1000e_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) { + if (reset) + e1000e_reset(adapter); + else if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); + } + e1000_clean_tx_ring(adapter->tx_ring); + e1000_clean_rx_ring(adapter->rx_ring); } void e1000e_reinit_locked(struct e1000_adapter *adapter)
--
2.1.0