[PATCHv2 net-next 1/5] cxgb4: Add support in debugfs to display sensor information
flat view
STALE4276d
From: Hariprasad Shenai <hidden>
Date: 2015-02-06 13:57:21
Subsystem:
cxgb4 ethernet driver (cxgb4), networking drivers, the rest · Maintainers:
Potnuri Bharat Teja, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Dump out various chip sensor information. Currently Chip Temperature and Core Voltage. Signed-off-by: Hariprasad Shenai <redacted> --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 36 ++++++++++++++++++++ drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 6 +++ 2 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index 61c000a..35ec230 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c@@ -813,6 +813,41 @@ static const struct file_operations mps_tcam_debugfs_fops = { .release = seq_release, }; +/* Display various sensor information. + */ +static int sensors_show(struct seq_file *seq, void *v) +{ + struct adapter *adap = seq->private; + u32 param[7], val[7]; + int ret; + + /* Note that if the sensors haven't been initialized and turned on + * we'll get values of 0, so treat those as "<unknown>" ... + */ + param[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DIAG) | + FW_PARAMS_PARAM_Y_V(FW_PARAM_DEV_DIAG_TMP)); + param[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DIAG) | + FW_PARAMS_PARAM_Y_V(FW_PARAM_DEV_DIAG_VDD)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + param, val); + + if (ret < 0 || val[0] == 0) + seq_puts(seq, "Temperature: <unknown>\n"); + else + seq_printf(seq, "Temperature: %dC\n", val[0]); + + if (ret < 0 || val[1] == 0) + seq_puts(seq, "Core VDD: <unknown>\n"); + else + seq_printf(seq, "Core VDD: %dmV\n", val[1]); + + return 0; +} + +DEFINE_SIMPLE_DEBUGFS_FILE(sensors); + #if IS_ENABLED(CONFIG_IPV6) static int clip_tbl_open(struct inode *inode, struct file *file) {
@@ -1584,6 +1619,7 @@ int t4_setup_debugfs(struct adapter *adap) { "obq_ulp3", &cim_obq_fops, S_IRUSR, 3 }, { "obq_sge", &cim_obq_fops, S_IRUSR, 4 }, { "obq_ncsi", &cim_obq_fops, S_IRUSR, 5 }, + { "sensors", &sensors_debugfs_fops, S_IRUSR, 0 }, { "pm_stats", &pm_stats_debugfs_fops, S_IRUSR, 0 }, #if IS_ENABLED(CONFIG_IPV6) { "clip_tbl", &clip_tbl_debugfs_fops, S_IRUSR, 0 },
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index c009627..9b353a8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h@@ -1059,6 +1059,7 @@ enum fw_params_param_dev { FW_PARAMS_PARAM_DEV_FWREV = 0x0B, FW_PARAMS_PARAM_DEV_TPREV = 0x0C, FW_PARAMS_PARAM_DEV_CF = 0x0D, + FW_PARAMS_PARAM_DEV_DIAG = 0x11, FW_PARAMS_PARAM_DEV_MAXORDIRD_QP = 0x13, /* max supported QP IRD/ORD */ FW_PARAMS_PARAM_DEV_MAXIRD_ADAPTER = 0x14, /* max supported adap IRD */ FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17,
@@ -1122,6 +1123,11 @@ enum fw_params_param_dmaq { FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH = 0x13, }; +enum fw_params_param_dev_diag { + FW_PARAM_DEV_DIAG_TMP = 0x00, + FW_PARAM_DEV_DIAG_VDD = 0x01, +}; + enum fw_params_param_dev_fwcache { FW_PARAM_DEV_FWCACHE_FLUSH = 0x00, FW_PARAM_DEV_FWCACHE_FLUSHINV = 0x01,
--
1.7.1