RE: [PATCH net-next 1/1] ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address

From: Shawn Guo <redacted> Sent: Tuesday, January 20, 2015 4:32 PM

To: Duan Fugang-B38611
Cc: davem@davemloft.net; netdev@vger.kernel.org; linux-arm-
kernel@lists.infradead.org; s.hauer@pengutronix.de; stefan@agner.ch
Subject: Re: [PATCH net-next 1/1] ARM: dts: imx6sx: correct i.MX6sx sdb
board enet phy address

On Mon, Jan 19, 2015 at 05:38:02PM +0800, Fugang Duan wrote:

quoted

The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The
cause is the commit add mdio node with un-correct phy address.

The patch just correct i.MX6sx sdb board enet phy address.

Signed-off-by: Fugang Duan <redacted>
---
 arch/arm/boot/dts/imx6sx-sdb.dts |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts

b/arch/arm/boot/dts/imx6sx-sdb.dts
index 8c1febd..9db123f 100644

--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts

@@ -167,11 +167,11 @@
 		#size-cells = <0>;

 		ethphy1: ethernet-phy@0 {

The unit-address should match 'reg' property, so it needs an update too.

Shawn

Yes, you are right.
I update it and send the next version.

Thanks,
Andy