[PATCH v1 3/3] drivers: net: xgene: Add SGMII based 1GbE ethtool support
From: Iyappan Subramanian <hidden>
Date: 2014-10-10 20:18:36
Also in:
linux-arm-kernel, linux-devicetree
Subsystem:
applied micro (apm) x-gene soc ethernet driver, networking drivers, the rest · Maintainers:
Iyappan Subramanian, Keyur Chudgar, Quan Nguyen, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Signed-off-by: Iyappan Subramanian <redacted> Signed-off-by: Keyur Chudgar <redacted> --- .../net/ethernet/apm/xgene/xgene_enet_ethtool.c | 25 +++++++++++++++------- 1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
index c1c997b..416d6eb 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c@@ -64,16 +64,25 @@ static int xgene_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) return -ENODEV; return phy_ethtool_gset(phydev, cmd); + } else if (pdata->phy_mode == PHY_INTERFACE_MODE_SGMII) { + cmd->supported = SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_MII; + cmd->advertising = cmd->supported; + ethtool_cmd_speed_set(cmd, SPEED_1000); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_MII; + cmd->transceiver = XCVR_INTERNAL; + cmd->autoneg = AUTONEG_ENABLE; + } else { + cmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE; + cmd->advertising = cmd->supported; + ethtool_cmd_speed_set(cmd, SPEED_10000); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_FIBRE; + cmd->transceiver = XCVR_INTERNAL; + cmd->autoneg = AUTONEG_DISABLE; } - cmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE; - cmd->advertising = cmd->supported; - ethtool_cmd_speed_set(cmd, SPEED_10000); - cmd->duplex = DUPLEX_FULL; - cmd->port = PORT_FIBRE; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = AUTONEG_DISABLE; - return 0; }
--
1.9.1