[net 4/4] ixgbe: fix race when setting advertised speed
From: Jeff Kirsher <hidden>
Date: 2014-10-30 12:33:59
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Emil Tantilov <redacted> Following commands: modprobe ixgbe ifconfig ethX up ethtool -s ethX advertise 0x020 can lead to "setup link failed with code -14" error due to the setup_link call racing with the SFP detection routine in the watchdog. This patch resolves this issue by protecting the setup_link call with check for __IXGBE_IN_SFP_INIT. Reported-by: Scott Harrison <redacted> Signed-off-by: Emil Tantilov <redacted> Tested-by: Phil Schmitt <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 3ce4a25..0ae038b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c@@ -342,12 +342,16 @@ static int ixgbe_set_settings(struct net_device *netdev, if (old == advertised) return err; /* this sets the link speed and restarts auto-neg */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + hw->mac.autotry_restart = true; err = hw->mac.ops.setup_link(hw, advertised, true); if (err) { e_info(probe, "setup link failed with code %d\n", err); hw->mac.ops.setup_link(hw, old, true); } + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); } else { /* in this case we currently only support 10Gb/FULL */ u32 speed = ethtool_cmd_speed(ecmd);
--
1.9.3