Thread (5 messages) 5 messages, 1 author, 2014-10-30
STALE4248d

[PATCH 5/6 V3.18] rtlwifi: rtl8821ae: Remove extra semicolons

From: Larry Finger <hidden>
Date: 2014-10-30 04:17:29
Also in: linux-wireless
Subsystem: networking drivers (wireless), the rest · Maintainers: Johannes Berg, Linus Torvalds

The kbuild test robot reports that there are extra semicolons in this
driver. All of them are caused by using "};" rather than "}" at the
end of a switch statement. This patch does not change any functionality.

Signed-off-by: Larry Finger <redacted>
Cc: Murilo Opsfelder Araujo <redacted>
---
 drivers/net/wireless/rtlwifi/rtl8821ae/phy.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8821ae/phy.c
index 1e9570f..9b4d8a6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/phy.c
@@ -800,7 +800,7 @@ static void _rtl8821ae_phy_set_txpower_by_rate_base(struct ieee80211_hw *hw,
 				 "Invalid RateSection %d in Band 2.4G,Rf Path %d, %dTx in PHY_SetTxPowerByRateBase()\n",
 				 rate_section, path, txnum);
 			break;
-		};
+		}
 	} else if (band == BAND_ON_5G) {
 		switch (rate_section) {
 		case OFDM:
@@ -823,7 +823,7 @@ static void _rtl8821ae_phy_set_txpower_by_rate_base(struct ieee80211_hw *hw,
 				"Invalid RateSection %d in Band 5G, Rf Path %d, %dTx in PHY_SetTxPowerByRateBase()\n",
 				rate_section, path, txnum);
 			break;
-		};
+		}
 	} else {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			"Invalid Band %d in PHY_SetTxPowerByRateBase()\n", band);
@@ -870,7 +870,7 @@ static u8 _rtl8821ae_phy_get_txpower_by_rate_base(struct ieee80211_hw *hw,
 				 "Invalid RateSection %d in Band 2.4G, Rf Path %d, %dTx in PHY_GetTxPowerByRateBase()\n",
 				 rate_section, path, txnum);
 			break;
-		};
+		}
 	} else if (band == BAND_ON_5G) {
 		switch (rate_section) {
 		case OFDM:
@@ -893,7 +893,7 @@ static u8 _rtl8821ae_phy_get_txpower_by_rate_base(struct ieee80211_hw *hw,
 				 "Invalid RateSection %d in Band 5G, Rf Path %d, %dTx in PHY_GetTxPowerByRateBase()\n",
 				 rate_section, path, txnum);
 			break;
-		};
+		}
 	} else {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "Invalid Band %d in PHY_GetTxPowerByRateBase()\n", band);
@@ -3746,7 +3746,7 @@ static void _rtl8821ae_iqk_tx_fill_iqc(struct ieee80211_hw *hw,
 		break;
 	default:
 		break;
-	};
+	}
 }
 
 static void _rtl8821ae_iqk_rx_fill_iqc(struct ieee80211_hw *hw,
@@ -3767,7 +3767,7 @@ static void _rtl8821ae_iqk_rx_fill_iqc(struct ieee80211_hw *hw,
 		break;
 	default:
 		break;
-	};
+	}
 }
 
 #define cal_num 10
-- 
2.1.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help