[PATCH RESEND v6 1/7] DT doc: net: cpsw mac-address is optional
From: Markus Pargmann <hidden>
Date: 2014-09-29 06:53:13
Also in:
linux-arm-kernel, linux-devicetree, linux-omap
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
mac-address is an optional property. If no mac-address is set, a random mac-address will be generated. Signed-off-by: Markus Pargmann <redacted> Reviewed-by: Wolfram Sang <redacted> --- Documentation/devicetree/bindings/net/cpsw.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index ae2b8b7f9c38..107caf174a0e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt@@ -29,10 +29,10 @@ Slave Properties: Required properties: - phy_id : Specifies slave phy id - phy-mode : See ethernet.txt file in the same directory -- mac-address : See ethernet.txt file in the same directory Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports +- mac-address : See ethernet.txt file in the same directory Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration.
--
2.1.0