[PATCH 1/2] 3c59x: Add dma error checking and recovery
From: Neil Horman <nhorman@tuxdriver.com>
Date: 2014-09-17 13:05:19
Also in:
lkml
Subsystem:
3c59x network driver, networking drivers, the rest · Maintainers:
Steffen Klassert, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Noted that 3c59x has no checks on transmit for failed DMA mappings, and no ability to unmap fragments when a single map fails in the middle of a transmit. This patch provides error checking to ensure that dma mappings work properly, and unrolls an skb mapping if a fragmented skb transmission has a mapping failure to prevent leaks. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <redacted> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <redacted> Tested-by: Meelis Roos <redacted> --- drivers/net/ethernet/3com/3c59x.c | 50 ++++++++++++++++++++++++++++++++------- 1 file changed, 41 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 3fe45c7..5621dab 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c@@ -2129,6 +2129,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) int entry = vp->cur_tx % TX_RING_SIZE; struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; unsigned long flags; + dma_addr_t dma_addr; if (vortex_debug > 6) { pr_debug("boomerang_start_xmit()\n");
@@ -2163,24 +2164,48 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum); if (!skb_shinfo(skb)->nr_frags) { - vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, - skb->len, PCI_DMA_TODEVICE)); + dma_addr = pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, + PCI_DMA_TODEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) + goto out_dma_err; + + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr); vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG); } else { int i; - vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, - skb_headlen(skb), PCI_DMA_TODEVICE)); + dma_addr = pci_map_single(VORTEX_PCI(vp), skb->data, + skb_headlen(skb), PCI_DMA_TODEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) + goto out_dma_err; + + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr); vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb)); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + dma_addr = skb_frag_dma_map(&VORTEX_PCI(vp)->dev, frag, + frag->page_offset, + frag->size, + DMA_TO_DEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) { + for(i = i-1; i >= 0; i--) + dma_unmap_page(&VORTEX_PCI(vp)->dev, + le32_to_cpu(vp->tx_ring[entry].frag[i+1].addr), + le32_to_cpu(vp->tx_ring[entry].frag[i+1].length), + DMA_TO_DEVICE); + + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[entry].frag[0].addr), + le32_to_cpu(vp->tx_ring[entry].frag[0].length), + PCI_DMA_TODEVICE); + + goto out_dma_err; + } + vp->tx_ring[entry].frag[i+1].addr = - cpu_to_le32(skb_frag_dma_map( - &VORTEX_PCI(vp)->dev, - frag, - frag->page_offset, frag->size, DMA_TO_DEVICE)); + cpu_to_le32(dma_addr); if (i == skb_shinfo(skb)->nr_frags-1) vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag)|LAST_FRAG);
@@ -2189,7 +2214,10 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) } } #else - vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); + dma_addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) + goto out_dma_err; + vp->tx_ring[entry].addr = cpu_to_le32(dma_addr); vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); #endif
@@ -2217,7 +2245,11 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_tx_timestamp(skb); iowrite16(DownUnstall, ioaddr + EL3_CMD); spin_unlock_irqrestore(&vp->lock, flags); +out: return NETDEV_TX_OK; +out_dma_err: + dev_err(&VORTEX_PCI(vp)->dev, "Error mapping dma buffer\n"); + goto out; } /* The interrupt handler does all of the Rx thread work and cleans up
--
1.9.3