[PATCH net 2/2] net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma
flat view
STALE4408d
SUPERSEDED
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2014-09-19 00:48:35
Subsystem:
broadcom genet ethernet driver, networking drivers, the rest · Maintainers:
Doug Berger, Florian Fainelli, Nicolai Buchwitz, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
We should not be manipulaging the DMA_CTRL registers directly by writing
0 to them to disable DMA. This is an operation that needs to be timed to
make sure the DMA engines have been properly stopped since their state
machine stops on a packet boundary, not immediately.
Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to
ensure a proper DMA engine state.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 11a96437862d..5d9eac37993d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c@@ -1749,8 +1749,7 @@ static void bcmgenet_fini_dma(struct bcmgenet_priv *priv) int i; /* disable DMA */ - bcmgenet_rdma_writel(priv, 0, DMA_CTRL); - bcmgenet_tdma_writel(priv, 0, DMA_CTRL); + bcmgenet_dma_teardown(priv); for (i = 0; i < priv->num_tx_bds; i++) { if (priv->tx_cbs[i].skb != NULL) {
--
1.9.1