[PATCH net-next v2 1/4] net: phy: bcm7xxx: introduce helper macro
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2014-08-26 20:16:02
Subsystem:
broadcom ethernet phy drivers, ethernet phy library, networking drivers, the rest · Maintainers:
Florian Fainelli, Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
All 28nm Gigabit PHYs supported by the driver have the same callbacks, the only differences being the 32-bits OUI and the name. Use a macro to factor this, making it easier in the future to add new entries. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/phy/bcm7xxx.c | 54 ++++++++++++++++------------------------------- 1 file changed, 18 insertions(+), 36 deletions(-)
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index e98c510b75c5..948c7086679a 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c@@ -319,44 +319,26 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev) return 0; } +#define BCM7XXX_28NM_GPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + .features = PHY_GBIT_FEATURES | \ + SUPPORTED_Pause | SUPPORTED_Asym_Pause, \ + .flags = PHY_IS_INTERNAL, \ + .config_init = bcm7xxx_28nm_afe_config_init, \ + .config_aneg = genphy_config_aneg, \ + .read_status = genphy_read_status, \ + .resume = bcm7xxx_28nm_resume, \ + .driver = { .owner = THIS_MODULE }, \ +} + static struct phy_driver bcm7xxx_driver[] = { + BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"), { - .phy_id = PHY_ID_BCM7366, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7366", - .features = PHY_GBIT_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_afe_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_resume, - .driver = { .owner = THIS_MODULE }, -}, { - .phy_id = PHY_ID_BCM7439, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7439", - .features = PHY_GBIT_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_afe_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_resume, - .driver = { .owner = THIS_MODULE }, -}, { - .phy_id = PHY_ID_BCM7445, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM7445", - .features = PHY_GBIT_FEATURES | - SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_IS_INTERNAL, - .config_init = bcm7xxx_28nm_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .resume = bcm7xxx_28nm_afe_config_init, - .driver = { .owner = THIS_MODULE }, -}, { .phy_id = PHY_BCM_OUI_4, .phy_id_mask = 0xffff0000, .name = "Broadcom BCM7XXX 40nm",
--
1.9.1