When the link goes down, the adjust_link method will be called, but
there is no synchronisation to ensure that we won't be processing some
last remaining packets via the NAPI handlers while performing a reset of
the device.

Add the necessary synchronisation to ensure that packet processing
is complete before we stop and reset the FEC.

Signed-off-by: Russell King <redacted>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 466268fffadd..b2b8aff3f73c 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c

@@ -1530,7 +1530,11 @@ static void fec_enet_adjust_link(struct net_device *ndev)
 		}
 	} else {
 		if (fep->link) {
+			napi_disable(&fep->napi);
+			netif_tx_lock_bh(ndev);
 			fec_stop(ndev);
+			netif_tx_unlock_bh(ndev);
+			napi_enable(&fep->napi);
 			fep->link = phy_dev->link;
 			status_change = 1;
 		}

-- 
1.8.3.1