[PATCH v2 0/3] Handle stuck TX queue bug in AT8030 PHY · Daniel Mack <zonque@gmail.com> · 2014-06-18
[PATCH v2 1/3] net: phylib: add link_change_notify callback to phy device · Daniel Mack <zonque@gmail.com> · 2014-06-18
[PATCH v2 2/3] net: phy: at803x: use #defines for supported PHY ids · Daniel Mack <zonque@gmail.com> · 2014-06-18
[PATCH v2 3/3] net: phy: at803x: Add support for hardware reset · Daniel Mack <zonque@gmail.com> · 2014-06-18
Re: [PATCH v2 0/3] Handle stuck TX queue bug in AT8030 PHY · David Miller <davem@davemloft.net> · 2014-06-21

Re: [PATCH v2 0/3] Handle stuck TX queue bug in AT8030 PHY

From: David Miller <davem@davemloft.net>
Date: 2014-06-21 22:51:14

From: Daniel Mack <zonque@gmail.com>
Date: Wed, 18 Jun 2014 11:01:40 +0200

These three small patches circument a hardware bug in AT8030 PHYs that
leads to stuck TX FIFO queues when the link goes away while there are
pending patches in der outbound queue. This bug has been confirmed by
the vendor, and their only proposed fix is to apply a hardware reset
every time the link goes down.

...

v1 -> v2:
	* Rename phy device callback from adjust_state to link_change_notify

Series applied, thanks Daniel.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help