[net-next 6/7] e1000: remove the check: skb->len<=0
flat view
STALE4524d
SUPERSEDED: 1 (0M)
From: Jeff Kirsher <hidden>
Date: 2014-06-03 07:47:38
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series; 1 review trailer.
Revisions (2)
- v1 current
- v2 [diff vs current]
From: Yongjian Xu <redacted> There is no case skb->len would be 0 or 'negative'. Remove the check. Signed-off-by: Yongjian Xu <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/e1000/e1000_main.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 27058df..660971f 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c@@ -3105,11 +3105,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, */ tx_ring = adapter->tx_ring; - if (unlikely(skb->len <= 0)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - /* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, * packets may get corrupted during padding by HW. * To WA this issue, pad all small packets manually.
--
1.9.3