[PATCH v2 2/4] net: ks8851: Use devm_regulator_get_optional()
From: Stephen Boyd <hidden>
Date: 2014-05-23 19:57:28
Also in:
linux-arm-kernel, linux-arm-msm, lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This simplifies error paths and removes the need to regulator_put(). Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <redacted> --- drivers/net/ethernet/micrel/ks8851.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 13767eb36a48..f2bfc708880c 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c@@ -1417,7 +1417,7 @@ static int ks8851_probe(struct spi_device *spi) ks->spidev = spi; ks->tx_space = 6144; - ks->vdd_reg = regulator_get_optional(&spi->dev, "vdd"); + ks->vdd_reg = devm_regulator_get_optional(&spi->dev, "vdd"); if (IS_ERR(ks->vdd_reg)) { ret = PTR_ERR(ks->vdd_reg); if (ret == -EPROBE_DEFER)
@@ -1427,7 +1427,7 @@ static int ks8851_probe(struct spi_device *spi) if (ret) { dev_err(&spi->dev, "regulator enable fail: %d\n", ret); - goto err_reg_en; + goto err_reg; } }
@@ -1530,9 +1530,6 @@ err_irq: err_id: if (!IS_ERR(ks->vdd_reg)) regulator_disable(ks->vdd_reg); -err_reg_en: - if (!IS_ERR(ks->vdd_reg)) - regulator_put(ks->vdd_reg); err_reg: free_netdev(ndev); return ret;
@@ -1547,10 +1544,8 @@ static int ks8851_remove(struct spi_device *spi) unregister_netdev(priv->netdev); free_irq(spi->irq, priv); - if (!IS_ERR(priv->vdd_reg)) { + if (!IS_ERR(priv->vdd_reg)) regulator_disable(priv->vdd_reg); - regulator_put(priv->vdd_reg); - } free_netdev(priv->netdev); return 0;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation