Re: [PATCH v2 2/4] Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
flat view
From: Sergei Shtylyov <hidden>
Date: 2014-04-18 19:51:52
Also in:
linux-arm-kernel, linux-devicetree, lkml
Hello. On 04/12/2014 07:06 AM, Iyappan Subramanian wrote:
This patch adds documentation for APM X-Gene SoC ethernet DTS binding.
Signed-off-by: Iyappan Subramanian <redacted> Signed-off-by: Ravi Patel <redacted> Signed-off-by: Keyur Chudgar <redacted> --- .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt new file mode 100644 index 0000000..0c983e8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt@@ -0,0 +1,46 @@ +APM X-Gene SoC Ethernet nodes + +Ethernet nodes are defined to describe on-chip ethernet interfaces in +APM X-Gene SoC. + +Required properties: +- compatible : Should be "apm,xgene-enet" +- reg : First resource is the ethernet base register set + Second resource is the ring base register set + Third resource is the ring command register set +- interrupts : Ethernet main interrupt +- clocks : Reference to the clock entry. +- local-mac-address : Ethernet MAC address.
This property is described in Documentation/devicetree/bindings/net/ethernet.txt, please refer to it.
+- phy-addr : Ethernet MII phy address.
No, thus won't do. Please use "phy-handle" property to refer to a PHY subnode.
+- phy-mode : Ethernet MII mode.
This one is described in Documentation/devicetree/bindings/net/ethernet.txt as well. WBR, Sergei