Thread (6 messages) flat view 6 messages, 3 authors, 2014-03-05

Re: [PATCH] net: sky2: allow mac to come from dt

From: Rob Herring <hidden>
Date: 2014-03-05 06:32:36
Also in: linux-devicetree

On Wed, Mar 5, 2014 at 12:22 AM, Tim Harvey [off-list ref] wrote:
quoted hunk ↗ jump to hunk
The driver reads the mac address from the device registers which would
need to have been programmed by the bootloader.  This patch adds
the ability to pull the mac from devicetree via the pci device dt node.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Grant Likely <redacted>
Cc: Rob Herring <robh+dt@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 55a37ae..bff493a 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -44,6 +44,8 @@
 #include <linux/prefetch.h>
 #include <linux/debugfs.h>
 #include <linux/mii.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>

 #include <asm/irq.h>
@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
 {
        struct sky2_port *sky2;
        struct net_device *dev = alloc_etherdev(sizeof(*sky2));
+       unsigned char *iap, tmpaddr[ETH_ALEN];

        if (!dev)
                return NULL;
@@ -4805,8 +4808,27 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,

        dev->features |= dev->hw_features;

+       /* try to get mac address in the following order:
+        * 1) from device tree data
+        * 2) from internal registers set by bootloader
+        */
+       iap = NULL;
+       if (IS_ENABLED(CONFIG_OF)) {
This shouldn't be needed.
+               struct device_node *np = hw->pdev->dev.of_node;
+               if (np)
+                       iap = (unsigned char *) of_get_mac_address(np);
+       }
This should all just be 1 line. of_get_mac_address should just return
NULL if !CONFIG_OF or np == NULL.
+
+       /* 2) mac registers set by bootloader
+        */
+       if (!iap || !is_valid_ether_addr(iap)) {
Perhaps is_valid_ether_addr check should also be moved into of_get_mac_address.

Rob
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help