Thread (17 messages) 17 messages, 2 authors, 2014-01-08

[net-next v2 14/15] i40e: remove redundant AQ enable

flat view
STALE4667d SUPERSEDED: 1 (0M)

From: Jeff Kirsher <hidden>
Date: 2014-01-08 06:08:50
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v2 of 58 in this series; 1 review trailer.

Revisions (58)
  1. v1 [diff vs current]
  2. v2
  3. v1 [diff vs current]
  4. v1 [diff vs current]
  5. v1 [diff vs current]
  6. v1 [diff vs current]
  7. v1 [diff vs current]
  8. v1 [diff vs current]
  9. v1 [diff vs current]
  10. v1 [diff vs current]
  11. v1 [diff vs current]
  12. v2
  13. v1 [diff vs current]
  14. v1 [diff vs current]
  15. v1 [diff vs current]
  16. v1 [diff vs current]
  17. v1 [diff vs current]
  18. v1 [diff vs current]
  19. v2
  20. v1 [diff vs current]
  21. v2
  22. v1 [diff vs current]
  23. v2
  24. v1 [diff vs current]
  25. v2
  26. v1 [diff vs current]
  27. v1 [diff vs current]
  28. v1 [diff vs current]
  29. v1 [diff vs current]
  30. v1 [diff vs current]
  31. v2
  32. v3 [diff vs current]
  33. v4 [diff vs current]
  34. v5 [diff vs current]
  35. v1 [diff vs current]
  36. v1 [diff vs current]
  37. v1 [diff vs current]
  38. v2 current
  39. v1 [diff vs current]
  40. v1 [diff vs current]
  41. v2
  42. v3 [diff vs current]
  43. v1 [diff vs current]
  44. v1 [diff vs current]
  45. v2
  46. v1 [diff vs current]
  47. v2
  48. v3 [diff vs current]
  49. v1 [diff vs current]
  50. v1 [diff vs current]
  51. v1 [diff vs current]
  52. v2
  53. v1 [diff vs current]
  54. v1 [diff vs current]
  55. v1 [diff vs current]
  56. v1 [diff vs current]
  57. v1 [diff vs current]
  58. v1 [diff vs current]
From: Kamil Krawczyk <redacted>

The admin queue length register is updated in
config_a<sq|rq>_regs functions.  We should not update it again,
as we will trigger firmware to init the AQ again. In this case
firmware will lose the information about the AQ Rx tail position
and will see Rx queue as full (no free desc for FW to use).

Signed-off-by: Kamil Krawczyk <redacted>
Signed-off-by: Jesse Brandeburg <redacted>
Tested-by: Kavindya Deegala <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c | 6 ------
 1 file changed, 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 18a768f..c87dc15 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -957,20 +957,14 @@ clean_arq_element_out:
 
 static void i40e_resume_aq(struct i40e_hw *hw)
 {
-	u32 reg = 0;
-
 	/* Registers are reset after PF reset */
 	hw->aq.asq.next_to_use = 0;
 	hw->aq.asq.next_to_clean = 0;
 
 	i40e_config_asq_regs(hw);
-	reg = hw->aq.num_asq_entries | I40E_PF_ATQLEN_ATQENABLE_MASK;
-	wr32(hw, hw->aq.asq.len, reg);
 
 	hw->aq.arq.next_to_use = 0;
 	hw->aq.arq.next_to_clean = 0;
 
 	i40e_config_arq_regs(hw);
-	reg = hw->aq.num_arq_entries | I40E_PF_ATQLEN_ATQENABLE_MASK;
-	wr32(hw, hw->aq.arq.len, reg);
 }
-- 
1.8.3.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help