[PATCH v3 4/5] bgmac: reset all cores on Northstar SoC
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: 2014-01-05 00:11:05
Subsystem:
broadcom iproc gbit ethernet driver, networking drivers, the rest · Maintainers:
Rafał Miłecki, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
On the Northstar SoC (BCM4707 and BCM53018) we have to enable all GMAC cores when we just want to use on. We iterate over all the cores and activate them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> --- drivers/net/ethernet/broadcom/bgmac.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 88ec69e..2cdacb8 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c@@ -1446,6 +1446,27 @@ static int bgmac_probe(struct bcma_device *core) bgmac_chip_reset(bgmac); + /* For Northstar, we have to take all GMAC core out of reset */ + if (core->id.id == BCMA_CHIP_ID_BCM4707 || + core->id.id == BCMA_CHIP_ID_BCM53018) { + struct bcma_device *ns_core; + int ns_gmac; + + /* Northstar has 4 GMAC cores */ + for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) { + /* As northstar requirement, we have to reset all GAMCs + * before accessing one. bgmac_chip_reset() call + * bcma_core_enable() for this core. Then the other + * three GAMCs didn't reset. We do it here. + */ + ns_core = bcma_find_core_unit(core->bus, + BCMA_CORE_MAC_GBIT, + ns_gmac); + if (ns_core && !bcma_core_is_enabled(ns_core)) + bcma_core_enable(ns_core, 0); + } + } + err = bgmac_dma_alloc(bgmac); if (err) { bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
--
1.7.10.4