Re: [PATCH v2 net 2/4] bridge: Apply the PVID to priority-tagged frames
From: Vlad Yasevich <hidden>
Date: 2013-10-16 15:52:30
On 10/16/2013 04:07 AM, Toshiaki Makita wrote:
IEEE 802.1Q says that when we receive priority-tagged (VID 0) frames use the PVID for the port as its VID. (See IEEE 802.1Q-2011 6.9.1 and Table 9-2) Apply the PVID to not only untagged frames but also priority-tagged frames. Signed-off-by: Toshiaki Makita <redacted>
Reviewed-by: Vlad Yasevich <redacted>
quoted hunk ↗ jump to hunk
--- net/bridge/br_vlan.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 21b6d21..5a9c44a 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c@@ -189,6 +189,8 @@ out: bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, struct sk_buff *skb, u16 *vid) { + int err; + /* If VLAN filtering is disabled on the bridge, all packets are * permitted. */@@ -201,20 +203,31 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v, if (!v) return false; - if (br_vlan_get_tag(skb, vid)) { + err = br_vlan_get_tag(skb, vid); + if (!*vid) { u16 pvid = br_get_pvid(v); - /* Frame did not have a tag. See if pvid is set - * on this port. That tells us which vlan untagged - * traffic belongs to. + /* Frame had a tag with VID 0 or did not have a tag. + * See if pvid is set on this port. That tells us which + * vlan untagged or priority-tagged traffic belongs to. */ if (pvid == VLAN_N_VID) return false; - /* PVID is set on this port. Any untagged ingress - * frame is considered to belong to this vlan. + /* PVID is set on this port. Any untagged or priority-tagged + * ingress frame is considered to belong to this vlan. */ - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), pvid); + if (likely(err)) + /* Untagged Frame. */ + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), pvid); + else + /* Priority-tagged Frame. + * At this point, We know that skb->vlan_tci had + * VLAN_TAG_PRESENT bit and its VID field was 0x000. + * We update only VID field and preserve PCP field. + */ + skb->vlan_tci |= pvid; + return true; }