[PATCH 2/7] rtlwifi: rtl8192cu: Convert to use new rtl_phy_scan_operation_backup() routine
From: Larry Finger <hidden>
Date: 2013-09-26 18:26:04
Also in:
linux-wireless
Subsystem:
networking drivers (wireless), the rest · Maintainers:
Johannes Berg, Linus Torvalds
Now that the routine exists in driver rtlwifi, convert rtl8192cu to use it. Signed-off-by: Larry Finger <redacted> --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 2bd5985..9936de7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c@@ -31,6 +31,7 @@ #include "../core.h" #include "../usb.h" #include "../efuse.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h"
@@ -117,7 +118,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .set_bw_mode = rtl92c_phy_set_bw_mode, .switch_channel = rtl92c_phy_sw_chnl, .dm_watchdog = rtl92c_dm_watchdog, - .scan_operation_backup = rtl92c_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl92cu_phy_set_rf_power_state, .led_control = rtl92cu_led_control, .enable_hw_sec = rtl92cu_enable_hw_security_config,
--
1.8.1.4