Re: SMSC 9303 support

On 2013-09-24 10:51, Ben Hutchings wrote:

On Tue, 2013-09-24 at 06:21 -0600, Gary Thomas wrote:

quoted

I need to support the SMSC9303 in an embedded system.  I'm not
finding any [explicit] support for this device in the latest
mainline kernel.  Did I miss something?

To be clear, the SMSC9303 is a 3-port managed ethernet switch
capable of supporting 802.1D/802.1Q directly. This switch is
driven by a single MAC via MII/RMII and exposes the other two
ports via physical PHYs.  What I need it to do is behave like
two external, separate devices.  I was thinking that what I need
to do is treat these as VLAN devices since the switch can manage
the routing.

Does this seem like a reasonable approach?

Linux has 'DSA' (Distributed Switch Architecture) which supports tagging
of packets to indicate which switch port they are sent or received
through.  This was originally added to support some Marvell switch chips
and I don't know whether it would be suitable or extensible for this
one.

I've used the DSA stuff for years (worked directly with the Marvell folks
when it was being developed).  It might work for this device, I'll think
some more about using it although I was hoping for a lighter weight solution.

quoted

How do I "hook up" my normal ethernet driver to it?  To the hardware
it just looks like any other MII/RMII PHY.  The device is managed
separately via I2C.  I can have that set up separately if necessary.

Thanks for any pointers/ideas

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------