Pull request: sfc 2013-09-17

7 messages, 2 authors, 2013-09-17 · open the first message on its own page

Pull request: sfc 2013-09-17

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:10:20

The following changes since commit ba39767288661c01ac7797b6b981f73b6513cf55:

  Merge branch 'qlcnic' (2013-08-31 22:35:26 -0400)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc.git sfc-3.12

for you to fetch changes up to a915ccc9f2c80aa4c329262d89f93ea16d8792c9:

  sfc: Reinitialise and re-validate datapath caps after MC reboot (2013-09-11 15:29:53 +0100)

Some bug fixes and future-proofing for the recently added SFC9120
support:

1. Minimal support for the 40G configuration.
2. Disable the incomplete PTP/hardware timestamping support.
3. Reset MAC stats properly after a firmware upgrade.
4. Re-check the datapath firmware capabilities after the controller is
reset.

Ben.

----------------------------------------------------------------
Ben Hutchings (5):
      sfc: Minimal support for 40G link speed
      sfc: Disable PTP on EF10 until we're ready to handle inline RX timestamps
      sfc: Reset derived rx_bad_bytes statistic when EF10 MC is rebooted
      sfc: Clean up validation of datapath capabilities
      sfc: Reinitialise and re-validate datapath caps after MC reboot

 drivers/net/ethernet/sfc/Kconfig     |  2 +-
 drivers/net/ethernet/sfc/ef10.c      | 58 +++++++++++++++++++++++-------------
 drivers/net/ethernet/sfc/mcdi_port.c |  2 ++
 drivers/net/ethernet/sfc/nic.h       |  3 ++
 4 files changed, 43 insertions(+), 22 deletions(-)

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

[PATCH net 1/5] sfc: Minimal support for 40G link speed

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:11:50

Accept and handle 40G link events.

Accept ethtool link settings of speed == 40000 && duplex, and set the
appropriate MCDI PHY capability.

This does not include reporting of 40G media types, as those have not
yet been assigned numbers in the MCDI protocol.

Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/sfc/Kconfig     | 2 +-
 drivers/net/ethernet/sfc/mcdi_port.c | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index 8b71525..0889212 100644
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -7,7 +7,7 @@ config SFC
 	select I2C_ALGOBIT
 	select PTP_1588_CLOCK
 	---help---
-	  This driver supports 10-gigabit Ethernet cards based on
+	  This driver supports 10/40-gigabit Ethernet cards based on
 	  the Solarflare SFC4000, SFC9000-family and SFC9100-family
 	  controllers.
 
diff --git a/drivers/net/ethernet/sfc/mcdi_port.c b/drivers/net/ethernet/sfc/mcdi_port.c
index 8d33da6..7b6be61 100644
--- a/drivers/net/ethernet/sfc/mcdi_port.c
+++ b/drivers/net/ethernet/sfc/mcdi_port.c
@@ -556,6 +556,7 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
 		case 100:   caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN;   break;
 		case 1000:  caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN;  break;
 		case 10000: caps = 1 << MC_CMD_PHY_CAP_10000FDX_LBN; break;
+		case 40000: caps = 1 << MC_CMD_PHY_CAP_40000FDX_LBN; break;
 		default:    return -EINVAL;
 		}
 	} else {
@@ -841,6 +842,7 @@ static unsigned int efx_mcdi_event_link_speed[] = {
 	[MCDI_EVENT_LINKCHANGE_SPEED_100M] = 100,
 	[MCDI_EVENT_LINKCHANGE_SPEED_1G] = 1000,
 	[MCDI_EVENT_LINKCHANGE_SPEED_10G] = 10000,
+	[MCDI_EVENT_LINKCHANGE_SPEED_40G] = 40000,
 };
 
 void efx_mcdi_process_link_change(struct efx_nic *efx, efx_qword_t *ev)

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

[PATCH net 2/5] sfc: Disable PTP on EF10 until we're ready to handle inline RX timestamps

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:12:12

Unlike Siena where timestamping is provided by a peripheral, EF10
delivers RX timestamps in the packet prefix.  However the driver
doesn't yet support this.

We are also creating a PHC device for each EF10 function, even though
the clock is really shared between all of them.

Disable hardware PTP/timestamping support until it's complete.

Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/sfc/ef10.c | 2 --
 1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 5f42313..357a6e5 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -260,8 +260,6 @@ static int efx_ef10_probe(struct efx_nic *efx)
 	if (rc)
 		goto fail3;
 
-	efx_ptp_probe(efx);
-
 	return 0;
 
 fail3:

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

[PATCH net 3/5] sfc: Reset derived rx_bad_bytes statistic when EF10 MC is rebooted

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:12:31

If the MC reboots then the stats it reports to us will have been
reset.  We need to reset ours to get efx_update_diff_stat() working
properly.

(This is a re-run of commit 876be083b669 'sfc: Reset driver's
MAC stats after MC reboot seen'.)

Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/sfc/ef10.c | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 357a6e5..80a6eea 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -708,6 +708,11 @@ static int efx_ef10_mcdi_poll_reboot(struct efx_nic *efx)
 	nic_data->must_restore_filters = true;
 	nic_data->rx_rss_context = EFX_EF10_RSS_CONTEXT_INVALID;
 
+	/* MAC statistics have been cleared on the NIC; clear the local
+	 * statistic that we update with efx_update_diff_stat().
+	 */
+	nic_data->stats[EF10_STAT_rx_bad_bytes] = 0;
+
 	return -EIO;
 }
 

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

[PATCH net 4/5] sfc: Clean up validation of datapath capabilities

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:13:07

Rename efx_ef10_init_capabilities() to the more specific
efx_ef10_init_datapath_caps().

Stop accepting short responses to MC_CMD_GET_CAPABILITIES; we
don't need to support pre-production firmware.

Move the check for RX prefix support from efx_ef10_probe() into
efx_ef10_init_datapath_caps() and use consistent error messages
for missing TSO support and missing RX prefix support.

Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/sfc/ef10.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 80a6eea..a4956b8 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -94,7 +94,7 @@ static unsigned int efx_ef10_mem_map_size(struct efx_nic *efx)
 	return resource_size(&efx->pci_dev->resource[EFX_MEM_BAR]);
 }
 
-static int efx_ef10_init_capabilities(struct efx_nic *efx)
+static int efx_ef10_init_datapath_caps(struct efx_nic *efx)
 {
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_CAPABILITIES_OUT_LEN);
 	struct efx_ef10_nic_data *nic_data = efx->nic_data;
@@ -107,16 +107,27 @@ static int efx_ef10_init_capabilities(struct efx_nic *efx)
 			  outbuf, sizeof(outbuf), &outlen);
 	if (rc)
 		return rc;
+	if (outlen < sizeof(outbuf)) {
+		netif_err(efx, drv, efx->net_dev,
+			  "unable to read datapath firmware capabilities\n");
+		return -EIO;
+	}
 
-	if (outlen >= sizeof(outbuf)) {
-		nic_data->datapath_caps =
-			MCDI_DWORD(outbuf, GET_CAPABILITIES_OUT_FLAGS1);
-		if (!(nic_data->datapath_caps &
-		     (1 << MC_CMD_GET_CAPABILITIES_OUT_TX_TSO_LBN))) {
-			netif_err(efx, drv, efx->net_dev,
-				  "Capabilities don't indicate TSO support.\n");
-			return -ENODEV;
-		}
+	nic_data->datapath_caps =
+		MCDI_DWORD(outbuf, GET_CAPABILITIES_OUT_FLAGS1);
+
+	if (!(nic_data->datapath_caps &
+	      (1 << MC_CMD_GET_CAPABILITIES_OUT_TX_TSO_LBN))) {
+		netif_err(efx, drv, efx->net_dev,
+			  "current firmware does not support TSO\n");
+		return -ENODEV;
+	}
+
+	if (!(nic_data->datapath_caps &
+	      (1 << MC_CMD_GET_CAPABILITIES_OUT_RX_PREFIX_LEN_14_LBN))) {
+		netif_err(efx, probe, efx->net_dev,
+			  "current firmware does not support an RX prefix\n");
+		return -ENODEV;
 	}
 
 	return 0;
@@ -217,21 +228,13 @@ static int efx_ef10_probe(struct efx_nic *efx)
 	if (rc)
 		goto fail3;
 
-	rc = efx_ef10_init_capabilities(efx);
+	rc = efx_ef10_init_datapath_caps(efx);
 	if (rc < 0)
 		goto fail3;
 
 	efx->rx_packet_len_offset =
 		ES_DZ_RX_PREFIX_PKTLEN_OFST - ES_DZ_RX_PREFIX_SIZE;
 
-	if (!(nic_data->datapath_caps &
-	      (1 << MC_CMD_GET_CAPABILITIES_OUT_RX_PREFIX_LEN_14_LBN))) {
-		netif_err(efx, probe, efx->net_dev,
-			  "current firmware does not support an RX prefix\n");
-		rc = -ENODEV;
-		goto fail3;
-	}
-
 	rc = efx_mcdi_port_get_number(efx);
 	if (rc < 0)
 		goto fail3;

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

[PATCH net 5/5] sfc: Reinitialise and re-validate datapath caps after MC reboot

From: Ben Hutchings <hidden>
Date: 2013-09-17 00:13:37

After an MC reboot, the datapath may be running a different firmware
variant and have different capabilities.  It is critical that we know
the current capabilities so that we can pass valid flags to
MC_CMD_INIT_EVQ.

Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/sfc/ef10.c | 10 ++++++++++
 drivers/net/ethernet/sfc/nic.h  |  3 +++
 2 files changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index a4956b8..9f18ae9 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -343,6 +343,13 @@ static int efx_ef10_init_nic(struct efx_nic *efx)
 	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	int rc;
 
+	if (nic_data->must_check_datapath_caps) {
+		rc = efx_ef10_init_datapath_caps(efx);
+		if (rc)
+			return rc;
+		nic_data->must_check_datapath_caps = false;
+	}
+
 	if (nic_data->must_realloc_vis) {
 		/* We cannot let the number of VIs change now */
 		rc = efx_ef10_alloc_vis(efx, nic_data->n_allocated_vis,
@@ -711,6 +718,9 @@ static int efx_ef10_mcdi_poll_reboot(struct efx_nic *efx)
 	nic_data->must_restore_filters = true;
 	nic_data->rx_rss_context = EFX_EF10_RSS_CONTEXT_INVALID;
 
+	/* The datapath firmware might have been changed */
+	nic_data->must_check_datapath_caps = true;
+
 	/* MAC statistics have been cleared on the NIC; clear the local
 	 * statistic that we update with efx_update_diff_stat().
 	 */
diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index 4b1e188..fda29d3 100644
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -400,6 +400,8 @@ enum {
  * @rx_rss_context: Firmware handle for our RSS context
  * @stats: Hardware statistics
  * @workaround_35388: Flag: firmware supports workaround for bug 35388
+ * @must_check_datapath_caps: Flag: @datapath_caps needs to be revalidated
+ *	after MC reboot
  * @datapath_caps: Capabilities of datapath firmware (FLAGS1 field of
  *	%MC_CMD_GET_CAPABILITIES response)
  */
@@ -413,6 +415,7 @@ struct efx_ef10_nic_data {
 	u32 rx_rss_context;
 	u64 stats[EF10_STAT_COUNT];
 	bool workaround_35388;
+	bool must_check_datapath_caps;
 	u32 datapath_caps;
 };
 
-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: Pull request: sfc 2013-09-17

From: David Miller <davem@davemloft.net>
Date: 2013-09-17 01:44:27

From: Ben Hutchings <redacted>
Date: Tue, 17 Sep 2013 01:10:11 +0100
  git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc.git sfc-3.12
 ...
Some bug fixes and future-proofing for the recently added SFC9120
support:

1. Minimal support for the 40G configuration.
2. Disable the incomplete PTP/hardware timestamping support.
3. Reset MAC stats properly after a firmware upgrade.
4. Re-check the datapath firmware capabilities after the controller is
reset.
Pulled, thanks Ben.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help