Re: v3.10/v3.11-rc1: mac80211/minstrel kernel crash
From: Felix Fietkau <hidden>
Date: 2013-07-19 11:36:45
Also in:
linux-wireless
On 2013-07-19 1:28 AM, Larry Finger wrote:
On 07/18/2013 05:21 PM, Aaro Koskinen wrote:quoted
Hello, It seems this has been broken already a while, I bisected it back to 06d961a8e210035bff7e82f466107f9ab4a8fd94 (mac80211/minstrel: use the new rate control API). Test case: modprobe b43 ifconfig wlan0 up iwlist wlan0 scanning Result: [ 95.244268] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 95.352823] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7 [ 95.423298] ieee80211 phy0: Selected rate control algorithm 'minstrel' [ 95.438266] Broadcom 43xx driver loaded [ Features: PN ] [ 99.482832] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 99.522916] b43-pci-bridge 0001:01:01.0: Using 32-bit DMA via iommu [ 123.452854] Unable to handle kernel paging request for data at address 0x00000048 [ 123.466119] Faulting instruction address: 0xc000000000673a1c [ 123.479072] Oops: Kernel access of bad area, sig: 11 [#1] [ 123.491678] PREEMPT PowerMac [ 123.503946] Modules linked in: b43 netconsole [ 123.515992] CPU: 0 PID: 490 Comm: kworker/u2:4 Not tainted 3.11.0-rc1-imac #1 [ 123.527834] Workqueue: phy0 .ieee80211_scan_work [ 123.539275] task: c00000011a6bbdb0 ti: c00000011a120000 task.ti: c00000011a120000 [ 123.551071] NIP: c000000000673a1c LR: c000000000653288 CTR: c0000000006739e0 [ 123.563010] REGS: c00000011a123310 TRAP: 0300 Not tainted (3.11.0-rc1-imac) [ 123.575142] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24002082 XER: 00000000 [ 123.587884] SOFTE: 1 [ 123.600276] DAR: 0000000000000048, DSISR: 40000000 [ 123.612867] GPR00: c000000000653288 c00000011a123590 c0000000009dba98 0000000000000000 GPR04: 0000000000000000 c00000011a123730 c00000011a123730 0000000000000000 GPR08: c00000011a162609 c0000000009d36d8 c0000000006739e0 c00000011a162600 GPR12: 0000000024002088 c00000000ffff000 c000000000077d90 c00000011a4dfa70 GPR16: 0000000000000000 0000000000000000 0000000000000001 0000000000000000 GPR20: 0000000000000000 0000000000000001 c00000000092df7f c00000011a355130 GPR24: 000000000000000a c00000011a123b60 c00000011a356660 c00000011a162600 GPR28: c00000011a461fc0 c00000011a162600 c00000011a123730 0000000000000000 [ 123.728058] NIP [c000000000673a1c] .minstrel_get_rate+0x3c/0x2e0 [ 123.740466] LR [c000000000653288] .rate_control_get_rate+0xf8/0x140 [ 123.752720] Call Trace: [ 123.764951] [c00000011a123590] [c00000011a123620] 0xc00000011a123620 (unreliable) [ 123.777526] [c00000011a123630] [c000000000653288] .rate_control_get_rate+0xf8/0x140 [ 123.790079] [c00000011a1236c0] [c000000000660ac8] .invoke_tx_handlers+0x8c8/0x14f0 [ 123.802633] [c00000011a1237f0] [c000000000662304] .ieee80211_tx+0x84/0x140 [ 123.815205] [c00000011a1238e0] [c000000000663c70] .__ieee80211_tx_skb_tid_band+0x70/0xa0 [ 123.827893] [c00000011a123970] [c000000000669b70] .ieee80211_send_probe_req+0x100/0x150 [ 123.840688] [c00000011a123a20] [c000000000645290] .ieee80211_scan_state_send_probe+0xc0/0x120 [ 123.853578] [c00000011a123af0] [c00000000064624c] .ieee80211_scan_work+0x26c/0x530 [ 123.866581] [c00000011a123bd0] [c00000000006ef5c] .process_one_work+0x17c/0x410 [ 123.879178] [c00000011a123c70] [c00000000006fd80] .worker_thread+0x180/0x4d0 [ 123.891354] [c00000011a123d40] [c000000000077e78] .kthread+0xe8/0xf0 [ 123.903468] [c00000011a123e30] [c000000000008ea0] .ret_from_kernel_thread+0x5c/0xbc [ 123.915706] Instruction dump: [ 123.927916] fbe1fff8 fb61ffd8 fba1ffe8 f8010010 f821ff61 7cbf2b78 7c7c1b78 7cc53378 [ 123.940781] 7c832378 7fe4fb78 7cde3378 eba60018 <8b7f0048> 4bfdec61 60000000 2fa30000 [ 123.953961] ---[ end trace 5ead5367d5fdf880 ]--- [ 123.966739] [ 124.969488] Kernel panic - not syncing: Fatal exception in interrupt [ 124.982408] Rebooting in 180 seconds..Does it help if you enable CONFIG_MAC80211_RC_MINSTREL_HT and make it default? I also have a PPC box with a PCMCIA-based BCM4318 and I do not see the problem with those differences. The other difference that I see is that I use the LXDE desktop and control the network with NetworkManager.
That bug is known, and Johannes already picked up my fix for it: https://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211.git/commit/?id=5c9fc93bc9bc417418fc1b6366833ae6a07b804d Enabling CONFIG_MAC80211_RC_MINSTREL_HT will indeed completely get rid of the crash. - Felix -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html