Thread (14 messages) 14 messages, 3 authors, 2013-05-30
STALE4745d

[PATCH 07/11] net: emaclite: Support multiple phys connected to one MDIO bus

From: Michal Simek <hidden>
Date: 2013-05-29 15:33:47
Also in: lkml
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

For system which contains at least two ethernet IP where
one IP manage MDIO bus with several PHYs.

Example dts node:
ethernet_mac0: ethernet@81000000 {
	compatible = "xlnx,xps-ethernetlite-1.00.a";
	device_type = "network";
	interrupt-parent = <&xps_intc_0>;
	interrupts = < 1 0 >;
		local-mac-address = [ 00 0a 35 00 db bb ];
	phy-handle = <&ethernet_mac0_phy0>;
	reg = < 0x81000000 0x10000 >;
	xlnx,duplex = <0x1>;
	xlnx,family = "spartan3e";
	xlnx,include-internal-loopback = <0x0>;
	xlnx,include-mdio = <0x1>;
	xlnx,rx-ping-pong = <0x0>;
	xlnx,tx-ping-pong = <0x0>;
	ethernet_mac0_mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		ethernet_mac0_phy0: phy@1 {
			reg = <0x1>;
		} ;
		ethernet_mac0_phy1: phy@3 {
			reg = <0x3>;
		} ;
	} ;
} ;
ethernet_mac2: ethernet@81040000 {
	compatible = "xlnx,xps-ethernetlite-1.00.a";
	device_type = "network";
	interrupt-parent = <&xps_intc_0>;
	interrupts = < 11 0 >;
		local-mac-address = [ 00 0a 35 00 db bb ];
	phy-handle = <&ethernet_mac0_phy1>;
	reg = < 0x81040000 0x10000 >;
	xlnx,duplex = <0x1>;
	xlnx,family = "spartan3e";
	xlnx,include-internal-loopback = <0x0>;
	xlnx,include-mdio = <0x0>;
	xlnx,rx-ping-pong = <0x0>;
	xlnx,tx-ping-pong = <0x0>;
} ;

Signed-off-by: Michal Simek <redacted>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index a16dc35..fcd1e0b 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -848,6 +848,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	int rc;
 	struct resource res;
 	struct device_node *np = of_get_parent(lp->phy_node);
+	struct device_node *npp;

 	/* Don't register the MDIO bus if the phy_node or its parent node
 	 * can't be found.
@@ -856,6 +857,17 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 		dev_err(dev, "Failed to register mdio bus.\n");
 		return -ENODEV;
 	}
+	npp = of_get_parent(np);
+
+	of_address_to_resource(npp, 0, &res);
+	if (lp->ndev->mem_start != res.start) {
+		struct phy_device *phydev;
+		phydev = of_phy_find_device(lp->phy_node);
+		if (!phydev)
+			dev_info(dev,
+				 "MDIO of the phy is not registered yet\n");
+		return 0;
+	}

 	/* Enable the MDIO bus by asserting the enable bit in MDIO Control
 	 * register.
@@ -869,7 +881,6 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 		return -ENOMEM;
 	}

-	of_address_to_resource(np, 0, &res);
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
 		 (unsigned long long)res.start);
 	bus->priv = lp;
--
1.8.2.3

Attachments

  • (unnamed) [application/pgp-signature] 198 bytes
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help