Hi Emilio,

On Fri, May 24, 2013 at 09:53:07AM -0300, Emilio López wrote:

Hi,

El 24/05/13 06:23, Maxime Ripard escribió:

quoted

From: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>
---
 arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b70fe0d..32d9b18 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -27,6 +27,21 @@
 	};
 
 	soc@01c20000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy0>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};

During my testing I found out that I needed to use 1 as reg for the
driver to work. You can find a fixup patch enclosed that changes this;
it's possible that some extra changes may also be needed (s/phy0/phy1/
on the node?)

Merged, thanks for noticing!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com