Re: [BUG] bisected: PandaBoard smsc95xx ethernet driver error from USB timeout

On 03/21/13 13:25, Frank Rowand wrote:

On 03/21/13 02:00, Ming Lei wrote:

< snip >

----------
There are some timeout messages that I am not positive are symptoms of
the problem.  With these messages, the smsc95xx driver initialization is
successful, so the ethernet device is available.  For the first bisect
attempt, I did not treat these messages as errors.  For the second bisect
attempt I treated these messages as errors.  A typical example of the
timeout message is:

  [    9.537811] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
  [   17.056701] usb 1-1.1: swapper/0 timed out on ep0out len=0/4
  [   17.062652] smsc95xx 1-1.1:1.0: eth0: Failed to write register index 0x00000108
  [   17.070343] smsc95xx 1-1.1:1.0: eth0: Failed to write ADDRL: -110
  [   17.076751] IP-Config: Failed to open eth0

Oops, pasted the wrong example.  This is an example of a timeout, but the
driver still works, and the system boots:

  [    6.072357] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, fa:50:73:02:79:67
  [    6.084655] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
  [   11.220672] usb 1-1.1: swapper/0 timed out on ep0out len=4/4
  [   18.183441] usb 1-1.1: link qh8-0001/dc8d6640 start 2 [1/0 us]
  [   19.822296] IP-Config: Complete:

  The mention of swapper is not relevent, it just happens to be the
  current process when the time out occurs.

I have only seen these timeout messages in the boot log, so they may not
be a very visible symptom.  They also _might_ be unrelated to the problem,
but my gut feel is that they are related.

< snip >

-Frank