[PATCH 1/3] net: stmmac: change GMAC control register for SGMII
From: Byungho An <bh74.an@samsung.com>
Date: 2012-11-23 09:04:27
Also in:
lkml
This patch changes GMAC control register (TC(Transmit Configuration) and PS(Port Selection) bit for SGMII. In case of SGMII, TC bit is '1' and PS bit is 0. Signed-off-by: Byungho An <bh74.an@samsung.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.cb/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c6cdbc4..a719c87 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -1037,6 +1037,7 @@ static int stmmac_open(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); int ret; + u32 value; #ifdef CONFIG_STMMAC_TIMER priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
@@ -1088,6 +1089,15 @@ static int stmmac_open(struct net_device *dev) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); + if (priv->phydev->interface == PHY_INTERFACE_MODE_SGMII) { + value = readl(priv->ioaddr); + /* GMAC_CONTROL_TC : transmit config in RGMII/SGMII */ + value |= 0x1000000; + /* GMAC_CONTROL_PS : Port Selection for GMII */ + value &= ~(0x8000); + writel(value, priv->ioaddr); + } + /* Request the IRQ lines */ ret = request_irq(dev->irq, stmmac_interrupt, IRQF_SHARED, dev->name, dev);
--
1.7.9.5