[PATCH v2 1/3] net/phy/davicom: add irq functions to DM9161E and DM9161A
From: Joachim Eastwood <hidden>
Date: 2012-11-11 23:56:34
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Both these PHYs support interrupt generation on IC pin 32. Signed-off-by: Joachim Eastwood <redacted> --- drivers/net/phy/davicom.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 81c7bc0..383e833 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c@@ -150,18 +150,24 @@ static struct phy_driver dm91xx_driver[] = { .name = "Davicom DM9161E", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, .config_init = dm9161_config_init, .config_aneg = dm9161_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x0181b8a0, .name = "Davicom DM9161A", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, .config_init = dm9161_config_init, .config_aneg = dm9161_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x00181b80,
--
1.8.0