Thread (14 messages) 14 messages, 2 authors, 2012-10-22

[PATCH V2 3/7] cpsw: correct the CPSW_PORT register bank declaration

flat view
STALE5101d

From: Richard Cochran <richardcochran@gmail.com>
Date: 2012-10-15 19:48:09
Also in: linux-arm-kernel
Subsystem: networking drivers, open firmware and flattened device tree bindings, the rest, ti ethernet switch driver (cpsw) · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Revision v2 of 2 in this series.

Revisions (2)
  1. rfc [diff vs current]
  2. v2 current
This commit corrects and expands the slave port register bank
according to TI's Technical Reference Manual.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |    8 ++++----
 arch/arm/boot/dts/am33xx.dtsi                  |    4 ++--
 drivers/net/ethernet/ti/cpsw.c                 |   18 ++++++++++++++----
 3 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index dcaabe9..3af47b7 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -59,14 +59,14 @@ Examples:
 		mac_control = <0x20>;
 		slaves = <2>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x208>;
+			slave_reg_ofs = <0x200>;
 			sliver_reg_ofs = <0xd80>;
 			phy_id = "davinci_mdio.16:00";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x308>;
+			slave_reg_ofs = <0x300>;
 			sliver_reg_ofs = <0xdc0>;
 			phy_id = "davinci_mdio.16:01";
 			/* Filled in by U-Boot */
@@ -93,14 +93,14 @@ Examples:
 		mac_control = <0x20>;
 		slaves = <2>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x208>;
+			slave_reg_ofs = <0x200>;
 			sliver_reg_ofs = <0xd80>;
 			phy_id = "davinci_mdio.16:00";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x308>;
+			slave_reg_ofs = <0x300>;
 			sliver_reg_ofs = <0xdc0>;
 			phy_id = "davinci_mdio.16:01";
 			/* Filled in by U-Boot */
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6bea04..cd9b3b4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -238,13 +238,13 @@
 			interrupts = <40 41 42 43>;
 			ranges;
 			cpsw_emac0: slave@0 {
-				slave_reg_ofs = <0x208>;
+				slave_reg_ofs = <0x200>;
 				sliver_reg_ofs = <0xd80>;
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
 			cpsw_emac1: slave@1 {
-				slave_reg_ofs = <0x308>;
+				slave_reg_ofs = <0x300>;
 				sliver_reg_ofs = <0xdc0>;
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1bdbb36..e29bb8f 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -157,16 +157,26 @@ struct cpsw_ss_regs {
 };
 
 struct cpsw_slave_regs {
+	u32	control;
+	u32	res1;
 	u32	max_blks;
 	u32	blk_cnt;
-	u32	flow_thresh;
+	u32	tx_in_ctl;
 	u32	port_vlan;
 	u32	tx_pri_map;
-	u32	ts_ctl;
-	u32	ts_seq_ltype;
-	u32	ts_vlan;
+	u32	ts_seq_mtype;
 	u32	sa_lo;
 	u32	sa_hi;
+	u32	send_percent;
+	u32	res2;
+	u32	rx_dscp_pri_map0;
+	u32	rx_dscp_pri_map1;
+	u32	rx_dscp_pri_map2;
+	u32	rx_dscp_pri_map3;
+	u32	rx_dscp_pri_map4;
+	u32	rx_dscp_pri_map5;
+	u32	rx_dscp_pri_map6;
+	u32	rx_dscp_pri_map7;
 };
 
 struct cpsw_host_regs {
-- 
1.7.2.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help