[PATCH net] bnx2x: fix HW initialization using fw 7.8.x
flat view
STALE5090d
From: Dmitry Kravkov <hidden>
Date: 2012-10-29 07:59:18
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov <redacted> Signed-off-by: Ariel Elior <redacted> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc..baa9a36 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c@@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { - bnx2x_init_block(bp, BLOCK_BRB1, init_phase); if (IS_MF(bp)) low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
--
1.7.7.2