Re: [net-next 12/13] ixgbe: Add support for pipeline reset
flat view
From: Martin Josefsson <hidden>
Date: 2012-10-21 12:06:30
On Sat, Oct 20, 2012 at 8:26 AM, Jeff Kirsher [off-list ref] wrote:
From: Don Skidmore <redacted>
Hi Jeff, Don,
Calling the ixgbe_reset_pipeline_82599 function will ensure a full pipeline reset on all 82599 devices. This is necessary to avoid possible link issues. Since this patch accomplishes this by modifying AUTOC.LMS we need to wrap all AUTOC writes when LESM is enabled.
The section below doesn't look right. Old behaviour gave LMS == 011b (SFI) New behaviour gives LMS == 000b (1 GbE link (no backplane auto-negotiation)) LMS is reset to 0 before ixgbe_reset_pipeline_82599() is called. Looks like that part of the old code wasn't removed.
quoted hunk ↗ jump to hunk
@@ -137,28 +135,37 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) usleep_range(hw->eeprom.semaphore_delay * 1000, hw->eeprom.semaphore_delay * 2000); + /* Need SW/FW semaphore around AUTOC writes if LESM on, + * likewise reset_pipeline requires lock as it also writes + * AUTOC. + */ + if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val) + goto setup_sfp_out; + + got_lock = true; + } + /* Now restart DSP by setting Restart_AN and clearing LMS */ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | IXGBE_AUTOC_AN_RESTART)); - /* Wait for AN to leave state 0 */ - for (i = 0; i < 10; i++) { - usleep_range(4000, 8000); - reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); - if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) - break; + ret_val = ixgbe_reset_pipeline_82599(hw); + + if (got_lock) { + hw->mac.ops.release_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + got_lock = false; } - if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { - hw_dbg(hw, "sfp module setup not complete\n"); + + if (ret_val) { + hw_dbg(hw, " sfp module setup not complete\n"); ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; goto setup_sfp_out; } - - /* Restart DSP by setting Restart_AN and return to SFI mode */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, - IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | - IXGBE_AUTOC_AN_RESTART)); } setup_sfp_out:
-- /Martin