[PATCH 08/14] net/at91_ether: compile macb for exported functions
flat view
STALE5106d
From: Joachim Eastwood <hidden>
Date: 2012-10-18 21:01:41
Subsystem:
atmel macb ethernet driver, networking drivers, the rest · Maintainers:
Théo Lebrun, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Comile macb as well as at91_ether to access exported functions. Signed-off-by: Joachim Eastwood <redacted> --- drivers/net/ethernet/cadence/Kconfig | 2 +- drivers/net/ethernet/cadence/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index db93191..57f78abe 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig@@ -27,7 +27,7 @@ config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 select NET_CORE - select MII + select PHYLIB ---help--- If you wish to compile a kernel for the AT91RM9200 and enable ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
index 9068b83..798b1e0 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile@@ -2,5 +2,5 @@ # Makefile for the Atmel network device drivers. # -obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o +obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o obj-$(CONFIG_MACB) += macb.o
--
1.7.12.3