Re: r8169 delay / segfault

Roland Stigge [off-list ref] :
[...]

on a Samsung laptop (x86_64, kernel 3.6.0), I get the following messages in the kernel
log after a suspend/resume cycle (doesn't happen after every suspend/resume but sometimes):

Oct 12 21:02:27 darwin kernel: [ 4289.829755] r8169 0000:02:00.0: wake-up capability disabled by ACPI
Oct 12 21:02:27 darwin kernel: [ 4289.830351] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).

[...]

Oct 12 21:02:27 darwin kernel: [ 4289.858920] r8169 0000:02:00.0: eth0: rtl_phyar_cond == 1 (loop: 20, delay: 25).

[...]

Oct 12 21:04:56 darwin kernel: [ 4441.330385] r8169 0000:02:00.0: eth0: rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
Oct 12 21:04:56 darwin kernel: [ 4441.331592] r8169 0000:02:00.0: eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
Oct 12 21:04:56 darwin kernel: [ 4441.332727] r8169 0000:02:00.0: eth0: rtl_ephyar_cond == 1 (loop: 100, delay: 10).

[...]

Oct 12 21:04:56 darwin kernel: [ 4441.343912] r8169 0000:02:00.0: eth0: rtl_eriar_cond == 1 (loop: 100, delay: 100).

The device seems completely unresponsive :o/

Oct 12 21:04:56 darwin kernel: [ 4441.454689] r8169 0000:02:00.0: eth0: link up

I copied a bigger part of the kernel log at http://antcom.de/kernel/dmesg.

Please tell me how I can help debugging or what else information you need.

The device does not recover despite the "link up" message, right ?

Can you send the XID line from the r8169 driver ? It should be in the
upper part of the dmesg log.

Which kernel version did you previously use ?

-- 
Ueimor