Re: 3.4.1 and 3.5-rc1 Packet lost at 250Mb/s

On 10/09/2012 12:56 PM, Nieścierowicz Adam wrote:

W dniu 08.10.2012 14:59, Andre Tomt napisał(a):

quoted

On 08. okt. 2012 14:32, Andre Tomt wrote:

quoted

On 08. okt. 2012 14:13, Eric Dumazet wrote:

quoted

On Mon, 2012-10-08 at 14:00 +0200, Andre Tomt wrote:

quoted

On 08. okt. 2012 12:49, Nieścierowicz Adam wrote:

quoted

W dniu 08.10.2012 11:47, Eric Dumazet napisał(a):

quoted

Anyway you dont say where are drops, (ifconfig give us very few
drops)

you can see no losses(drop), but a temporary decline in traffic
on the interface to 0kb/s

This sounds very familiar, could it be something similar to:
http://marc.info/?l=linux-netdev&m=134594936016796&w=3 [1] The chip
seems to be of the same family (though not model)

Yes, but Adam says 3.4.1 already has a problem, while commit
2cb7a9cc008c25dc03314de563c00c107b3e5432 is in 3.5 only. Since Adam
uses Intel e1000e, it could be the BQL related problem.

The other chips have had DMA burst flag enabled for longer, so that he
sees the same problem in 3.4 while I'm not makes sense. Hmm, as 3.4 is
when BQL went in (IIRC) it seems very likely that this BQL issue is the
problem for both of us.

To clarify; I think the DMA burst flag in the driver triggers the BQL
related issue. Judging by the patchwork link for wthresh=1 this seems
very related indeed.

Removing the FLAG2_DMA_BURST flag for 82574 in the driver works for me.
Adam, it might be worth testing out a build on your system too with the
flag removed. If you try the attached patch (for 3.6, probably OK for
3.5) and the problem dissapears, we are probably at least talking about
the same bug.

after applying the patch everything looks good, no visible loss

Do you expect to correct the bug in mainline? Jesse Brandenburg is working on a patch for upstream currently to fix the issue.