[PATCH 1/2] can: janz-ican3: fix support for older hardware revisions
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2012-09-21 11:05:45
Also in:
linux-can
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
From: "Ira W. Snyder" <redacted> The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable <redacted> Signed-off-by: Ira W. Snyder <redacted> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/net/can/janz-ican3.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 98ee438..7edadee 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c@@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id) */ static int ican3_reset_module(struct ican3_dev *mod) { - u8 val = 1 << mod->num; unsigned long start; u8 runold, runnew;
@@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod) runold = ioread8(mod->dpm + TARGET_RUNNING); /* reset the module */ - iowrite8(val, &mod->ctrl->reset_assert); - iowrite8(val, &mod->ctrl->reset_deassert); + iowrite8(0x00, &mod->dpmctrl->hwreset); /* wait until the module has finished resetting and is running */ start = jiffies;
--
1.7.10