[PATCH v1 07/19] qlcnic: get board name API
flat view
STALE5132d
From: Sony Chacko <hidden>
Date: 2012-09-20 01:12:41
Subsystem:
networking drivers, qlogic qlcnic (1/10)gb ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Shahed Shaikh, Manish Chopra, Linus Torvalds
Revision v1 of 13 in this series.
Revisions (13)
From: Sony Chacko <redacted> Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Signed-off-by: Sony Chacko <redacted> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 26 +---------------- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 34 ++++++++++++++++++--- 2 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index a50219b..b68ea92 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h@@ -1567,7 +1567,7 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *, struct net_device *); */ #define QLCNIC_MAX_BOARD_NAME_LEN 100 -struct qlcnic_brdinfo { +struct qlcnic_board_info { unsigned short vendor; unsigned short device; unsigned short sub_vendor;
@@ -1575,30 +1575,6 @@ struct qlcnic_brdinfo { char short_name[QLCNIC_MAX_BOARD_NAME_LEN]; }; -static const struct qlcnic_brdinfo qlcnic_boards[] = { - {0x1077, 0x8020, 0x1077, 0x203, - "8200 Series Single Port 10GbE Converged Network Adapter " - "(TCP/IP Networking)"}, - {0x1077, 0x8020, 0x1077, 0x207, - "8200 Series Dual Port 10GbE Converged Network Adapter " - "(TCP/IP Networking)"}, - {0x1077, 0x8020, 0x1077, 0x20b, - "3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"}, - {0x1077, 0x8020, 0x1077, 0x20c, - "3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"}, - {0x1077, 0x8020, 0x1077, 0x20f, - "3200 Series Single Port 10Gb Intelligent Ethernet Adapter"}, - {0x1077, 0x8020, 0x103c, 0x3733, - "NC523SFP 10Gb 2-port Server Adapter"}, - {0x1077, 0x8020, 0x103c, 0x3346, - "CN1000Q Dual Port Converged Network Adapter"}, - {0x1077, 0x8020, 0x1077, 0x210, - "QME8242-k 10GbE Dual Port Mezzanine Card"}, - {0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"}, -}; - -#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards) - static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring) { if (likely(tx_ring->producer < tx_ring->sw_consumer))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 615bacb..9076f49 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c@@ -163,6 +163,30 @@ static const u32 qlcnic_reg_tbl[] = { 0x13C014, /* flash unlock */ }; +static const struct qlcnic_board_info qlcnic_boards[] = { + {0x1077, 0x8020, 0x1077, 0x203, + "8200 Series Single Port 10GbE Converged Network Adapter " + "(TCP/IP Networking)"}, + {0x1077, 0x8020, 0x1077, 0x207, + "8200 Series Dual Port 10GbE Converged Network Adapter " + "(TCP/IP Networking)"}, + {0x1077, 0x8020, 0x1077, 0x20b, + "3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"}, + {0x1077, 0x8020, 0x1077, 0x20c, + "3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"}, + {0x1077, 0x8020, 0x1077, 0x20f, + "3200 Series Single Port 10Gb Intelligent Ethernet Adapter"}, + {0x1077, 0x8020, 0x103c, 0x3733, + "NC523SFP 10Gb 2-port Server Adapter"}, + {0x1077, 0x8020, 0x103c, 0x3346, + "CN1000Q Dual Port Converged Network Adapter"}, + {0x1077, 0x8020, 0x1077, 0x210, + "QME8242-k 10GbE Dual Port Mezzanine Card"}, + {0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"}, +}; + +#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards) + static const struct qlcnic_legacy_intr_set legacy_intr[] = QLCNIC_LEGACY_INTR_CONFIG;
@@ -677,7 +701,7 @@ qlcnic_setup_pci_map(struct pci_dev *pdev, return 0; } -static void get_brd_name(struct qlcnic_adapter *adapter, char *name) +static void qlcnic_get_board_name(struct qlcnic_adapter *adapter, char *name) { struct pci_dev *pdev = adapter->pdev; int i, found = 0;
@@ -1602,7 +1626,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct qlcnic_hardware_context *ahw; int err; uint8_t pci_using_dac; - char brd_name[QLCNIC_MAX_BOARD_NAME_LEN]; + char board_name[QLCNIC_MAX_BOARD_NAME_LEN]; err = pci_enable_device(pdev); if (err)
@@ -1683,11 +1707,11 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_warn(&pdev->dev, "failed to read mac addr\n"); if (adapter->portnum == 0) { - get_brd_name(adapter, brd_name); + qlcnic_get_board_name(adapter, board_name); pr_info("%s: %s Board Chip rev 0x%x\n", - module_name(THIS_MODULE), - brd_name, adapter->ahw->revision_id); + module_name(THIS_MODULE), + board_name, adapter->ahw->revision_id); } err = qlcnic_setup_intr(adapter, 0); if (err)
--
1.7.1