[PATCH 2/2] can: sja1000_platform: fix wrong flag IRQF_SHARED for interrupt sharing

From: Sven Schmitt <redacted>

The sja1000 platform driver wrongly assumes that a shared IRQ is indicated
with the IRQF_SHARED flag in irq resource flags. This patch changes the
driver to handle the correct flag IORESOURCE_IRQ_SHAREABLE instead.

There are no mainline users of the platform driver which wrongly make use
of IRQF_SHARED.

Signed-off-by: Sven Schmitt <redacted>
Acked-by: Yegor Yefremov <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/sja1000_platform.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 4f50145..662c5f7 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c

@@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev)
 	priv = netdev_priv(dev);
 
 	dev->irq = res_irq->start;
-	priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED);
+	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+	if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
+		priv->irq_flags |= IRQF_SHARED;
 	priv->reg_base = addr;
 	/* The CAN clock frequency is half the oscillator clock frequency */
 	priv->can.clock.freq = pdata->osc_freq / 2;

-- 
1.7.10