Re: [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device

Stephen Warren wrote:

quoted

quoted

quoted

quoted

Then, that'd have to be <9 1>;

Actually, I had #size-cells = <0>.

I think that if you have #size-cells=<0>, then you'll see the following
error message when attempting to translate the address into the parent's
address space:

prom_parse: Bad cell count for /board-control@3,0/mdio-mux-emi2

It doesn't appear to be working.  Here's my tree:

/ {
	model = "fsl,P5020DS";
	compatible = "fsl,P5020DS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	lbc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x1000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  2 0 0xf 0xffa00000 0x00040000
			  3 0 0xf 0xffdf0000 0x00008000>;

		fpga: board-control@3,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
			reg = <3 0 0x30>;

			mdio-mux-emi1 {
				compatible = "mdio-mux-mmioreg";
				mdio-parent-bus = <&mdio0>;
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <9 1>; // BRDCFG1
				mux-mask = <0x78>; // EMI1

That means that the physical address that I need is fffdf0009.  However,
when I call of_address_to_resource(), the returned address I get is fe8000009.

So it's not picking up the "3" in the 'reg' property of the
board-control@3,0 node.  What am I missing?  Do I need a 'ranges' property
in the board-control@3,0 node?

-- 
Timur Tabi
Linux kernel developer at Freescale