[PATCH 6/9] x86: OLPC: switch over to using new EC driver on x86
From: Andres Salomon <hidden>
Date: 2012-07-19 04:28:55
Also in:
linux-wireless, lkml, platform-driver-x86
Subsystem:
the rest, x86 architecture (32-bit and 64-bit) · Maintainers:
Linus Torvalds, Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen
This uses the new EC driver framework in drivers/platform/olpc. The XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff (including a new workqueue; no more running EC commands with IRQs disabled!) can be shared with other architectures. Signed-off-by: Andres Salomon <redacted> --- arch/x86/include/asm/olpc.h | 5 --- arch/x86/platform/olpc/olpc.c | 53 ++++++++++++++++++++------------------- drivers/platform/olpc/olpc-ec.c | 5 --- 3 files changed, 27 insertions(+), 36 deletions(-)
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 5b28f3e..72f9adf6 100644
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h@@ -100,11 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value); extern int pci_olpc_init(void); -/* EC related functions */ - -extern int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, - size_t inlen, unsigned char *outbuf, size_t outlen); - /* SCI source values */ #define EC_SCI_SRC_EMPTY 0x00
diff --git a/arch/x86/platform/olpc/olpc.cb/arch/x86/platform/olpc/olpc.c index a3fa180..4590096 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c@@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> -#include <linux/spinlock.h> #include <linux/io.h> #include <linux/string.h> #include <linux/platform_device.h>
@@ -32,8 +31,6 @@ struct olpc_platform_t olpc_platform_info; EXPORT_SYMBOL_GPL(olpc_platform_info); -static DEFINE_SPINLOCK(ec_lock); - /* debugfs interface to EC commands */ #define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */ #define EC_MAX_CMD_REPLY (8)
@@ -126,16 +123,13 @@ static int __wait_on_obf(unsigned int line,unsigned int port, int desired) * <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while * OpenFirmware's source is available, the EC's is not. */ -int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen) +static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, + size_t outlen, void *arg) { - unsigned long flags; int ret = -EIO; int i; int restarts = 0; - spin_lock_irqsave(&ec_lock, flags); - /* Clear OBF */ for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++) inb(0x68);
@@ -199,10 +193,8 @@ restart: ret = 0; err: - spin_unlock_irqrestore(&ec_lock, flags); return ret; } -EXPORT_SYMBOL_GPL(olpc_ec_cmd_x86); void olpc_ec_wakeup_set(u16 value) {
@@ -366,7 +358,7 @@ static void setup_debugfs(void) &ec_debugfs_genops); } -static int olpc_ec_suspend(void) +static int olpc_ec_suspend(struct platform_device *pdev) { return olpc_ec_mask_write(ec_wakeup_mask); }
@@ -425,8 +417,28 @@ static int __init add_xo1_platform_devices(void) return 0; } -static struct syscore_ops olpc_syscore_ops = { +static int olpc_xo1_ec_probe(struct platform_device *pdev) +{ + /* get the EC revision */ + olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, + (unsigned char *) &olpc_platform_info.ecver,
1); +
+ /* EC version 0x5f adds support for wide SCI mask */
+ if (olpc_platform_info.ecver >= 0x5f)
+ olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
+
+ pr_info("OLPC board revision %s%X (EC=%x)\n",
+ ((olpc_platform_info.boardrev & 0xf) < 8) ?
"pre" : "",
+ olpc_platform_info.boardrev >> 4,
+ olpc_platform_info.ecver);
+
+ return 0;
+}
+
+static struct olpc_ec_driver ec_xo1_driver = {
.suspend = olpc_ec_suspend,
+ .probe = olpc_xo1_ec_probe,
+ .ec_cmd = olpc_xo1_ec_cmd,
};
static int __init olpc_init(void)@@ -436,16 +448,14 @@ static int __init olpc_init(void) if (!olpc_ofw_present() || !platform_detect()) return 0; - spin_lock_init(&ec_lock); + /* register the XO-1 and 1.5-specific EC handler */ + olpc_ec_driver_register(&ec_xo1_driver, NULL); + platform_device_register_simple("olpc-ec", -1, NULL, 0); /* assume B1 and above models always have a DCON */ if (olpc_board_at_least(olpc_board(0xb1))) olpc_platform_info.flags |= OLPC_F_DCON; - /* get the EC revision */ - olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, - (unsigned char *) &olpc_platform_info.ecver,
1); - #ifdef CONFIG_PCI_OLPC /* If the VSA exists let it emulate PCI, if not emulate in kernel. * XO-1 only. */
@@ -453,14 +463,6 @@ static int __init olpc_init(void) !cs5535_has_vsa2()) x86_init.pci.arch_init = pci_olpc_init; #endif - /* EC version 0x5f adds support for wide SCI mask */ - if (olpc_platform_info.ecver >= 0x5f) - olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI; - - printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n", - ((olpc_platform_info.boardrev & 0xf) < 8) ?
"pre" : "",
- olpc_platform_info.boardrev >> 4,
- olpc_platform_info.ecver);
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /*
XO-1 */ r = add_xo1_platform_devices();@@ -468,7 +470,6 @@ static int __init olpc_init(void) return r; } - register_syscore_ops(&olpc_syscore_ops); setup_debugfs(); return 0;
diff --git a/drivers/platform/olpc/olpc-ec.cb/drivers/platform/olpc/olpc-ec.c index cfba41f..a3d32c2 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c@@ -113,11 +113,6 @@ int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen,u8 *outbuf, size_t outlen) struct olpc_ec_priv *ec = ec_priv; struct ec_cmd_desc desc; - /* XXX: this will be removed in later patches */ - /* Are we using old-style callers? */ - if (!ec_driver || !ec_driver->ec_cmd) - return olpc_ec_cmd_x86(cmd, inbuf, inlen, outbuf, outlen); - /* Ensure a driver and ec hook have been registered */ if (WARN_ON(!ec_driver || !ec_driver->ec_cmd)) return -ENODEV; -- 1.7.2.5