[PATCH] qlge: Add offload features to vlan interfaces

This patch fills the net_device vlan_features with the proper hardware features,
thus, improving the vlan interface performance.

With the patch applied, I can see around 148% improvement on a TCP_STREAM test,
from 3.5 Gb/s to 8.7 Gb/s. On TCP_RR, I see a 11% improvement, from 18k
to 20. The CPU utilization is almost the same on both cases, from the comparison
above.

Signed-off-by: Breno Leitao <redacted>

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index 3769f57..b53a3b6 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c

@@ -4682,6 +4682,7 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 		NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
 	ndev->features = ndev->hw_features |
 		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+	ndev->vlan_features = ndev->hw_features;
 
 	if (test_bit(QL_DMA64, &qdev->flags))
 		ndev->features |= NETIF_F_HIGHDMA;

-- 
1.7.1