[PATCH] cxgb3: Set vlan_feature on net_device
From: <hidden>
Date: 2012-07-27 18:22:46
Subsystem:
cxgb3 ethernet driver (cxgb3), networking drivers, the rest · Maintainers:
Potnuri Bharat Teja, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
cxgb3 interface has a bad performance when VLAN is set. On my current setup, a PowerLinux 7R2, I am able to get around 7 Gbps on a TCP_STREAM (8 instances, 4k message). With this patch, I am able to reach 9.5 Gbps. Signed-off-by: Breno Leitao <redacted>
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index abb6ce7..fcf4b31 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c@@ -3173,6 +3173,9 @@ static void __devinit cxgb3_init_iscsi_mac(struct net_device *dev) pi->iscsic.mac_addr[3] |= 0x80; } +#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) +#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \ + NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA) static int __devinit init_one(struct pci_dev *pdev, const struct pci_device_id *ent) {
@@ -3293,6 +3296,7 @@ static int __devinit init_one(struct pci_dev *pdev, netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_RX; netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_TX; + netdev->vlan_features |= netdev->features & VLAN_FEAT; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA;
--
1.7.1