Thread (1 message) 1 message, 1 author, 2012-07-06

Re: Intel e1000 ethernet device, change in kernel v3.4, and jumbo frames setting DENIED.

From: Jeff Kirsher <hidden>
Date: 2012-07-06 06:17:17

On 07/05/2012 04:53 PM, D. Stussy wrote:
quoted hunk
"Henrique de Moraes Holschuh"  wrote in message
news:jjGoO-7l0-19@gated-at.bofh.it...
On Wed, 04 Jul 2012, D. Stussy wrote:
quoted
There has been some changes to the driver such that things like
checksum verification is offloaded from the CPU.  However, this
blocks the ability to set a jumbo frame.  The kernel does record an
error indicating that checksum offloading need be disabled fro jumbo
frame MTU sizes to be used.  My e1000 interfaces use the 82574L
chipset.

1)  Was this an intentional change?
Yes, but I understand Intel is trying to come up with a way not to
need it.
==============
OK, found the modification.  NETIF_F_RXHASH turned on by default in a
modification ("Receive Packet Steering support") from January 26, 2012.

Features which have no OFF setting should DEFAULT OFF and wait to be
explicitly enabled.  The change which was inserted is stupid.
==============
quoted
2)  How do I disable that function so I can set jumbo frames with
"ifconfig" or "ip"?  I simply don't know what setting I need to
pass.
ethtool can do it.  Check its manpage, it can manipulate the various NIC
offload engines, as well as other parameters such as dma ring buffer
size,
etc.
===============
Got it:  ethtool -K eth0 rx off

However, I'd prefer to turn off hashing instead of the checksum and I
didn't recognize a single setting which would do that.  Under "ethtool
-N", there seem to be 8 settings, but none of the options seemed to
disable hashing (without simultaneously dropping packets).  I still
need help:  What is the correct setting I need to disable this?  I
don't see a simple OFF setting.

Else, this part of the patch should be reversed:
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6136,6 +6213,7 @@ static int __devinit e1000_probe(struct pci_dev
*pdev,
NETIF_F_HW_VLAN_TX |
NETIF_F_TSO |
NETIF_F_TSO6 |
+                NETIF_F_RXHASH |
NETIF_F_RXCSUM |
NETIF_F_HW_CSUM);
-- 
Adding the more appropriate mailing lists of netdev and e1000-devel

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help