[PATCH net-next 3/3] qlcnic: Fix protcol type in case of inband vlan.
From: Anirban Chakraborty <hidden>
Date: 2012-06-06 17:50:52
Subsystem:
networking drivers, qlogic qlcnic (1/10)gb ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Shahed Shaikh, Manish Chopra, Linus Torvalds
From: Rajesh Borundia <redacted> o Use correct l3 (ETH_IP or ETH_IPV6)protcol in case of inband vlan. Because of incorrect protcol type driver was setting incorrect opcode. This resulted in adapter calculating checksum incorrectly. o Updated driver version to 5.0.29 Signed-off-by: Rajesh Borundia <redacted> Signed-off-by: Anirban Chakraborty <redacted> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 4 ++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index df4552f..eaa1db9 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h@@ -36,8 +36,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 28 -#define QLCNIC_LINUX_VERSIONID "5.0.28" +#define _QLCNIC_LINUX_SUBVERSION 29 +#define QLCNIC_LINUX_VERSIONID "5.0.29" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 707b5ca..33c3e46 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c@@ -2033,6 +2033,7 @@ qlcnic_tx_pkt(struct qlcnic_adapter *adapter, vh = (struct vlan_ethhdr *)skb->data; flags = FLAGS_VLAN_TAGGED; vlan_tci = vh->h_vlan_TCI; + protocol = ntohs(vh->h_vlan_encapsulated_proto); } else if (vlan_tx_tag_present(skb)) { flags = FLAGS_VLAN_OOB; vlan_tci = vlan_tx_tag_get(skb);
--
1.7.4.1