[PATCH 10/10] atl1c: remove PHY polling from atl1c_change_mtu
From: xiong <hidden>
Date: 2012-05-01 01:40:36
Also in:
lkml
Subsystem:
atlx ethernet drivers, networking drivers, the rest · Maintainers:
Chris Snook, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
PHY polling code for FPGA is considered in every MDIO R/W API. no need to add additional code to atl1c_change_mtu. Signed-off-by: xiong <redacted> Tested-by: David Liu <redacted> --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 8 -------- 1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 05ce8ec..9cc1570 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c@@ -553,14 +553,6 @@ static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) netdev_update_features(netdev); atl1c_up(adapter); clear_bit(__AT_RESETTING, &adapter->flags); - if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { - u32 phy_data; - - AT_READ_REG(&adapter->hw, 0x1414, &phy_data); - phy_data |= 0x10000000; - AT_WRITE_REG(&adapter->hw, 0x1414, phy_data); - } - } return 0; }
--
1.7.7