Re: [PATCH] davinci_emac: Add cpu_freq support

Reconfigure interrupt coalesce parameter for changed emac bus_freq
due to DVFS.

Signed-off-by: Manjunathappa, Prakash <redacted>
---
 drivers/net/ethernet/ti/davinci_emac.c |   60 ++++++++++++++++++++++++++++++++
 1 files changed, 60 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 174a334..11d3bd7 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c

@@ -50,6 +50,7 @@
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
+#include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/semaphore.h>

@@ -344,6 +345,9 @@ struct emac_priv {
 	/*platform specific members*/
 	void (*int_enable) (void);
 	void (*int_disable) (void);
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* clock frequency for EMAC */

@@ -1761,6 +1765,46 @@ static const struct net_device_ops emac_netdev_ops = {
 #endif
 };
 
+#ifdef CONFIG_CPU_FREQ
+static int davinci_emac_cpufreq_transition(struct notifier_block *nb,
+				     unsigned long val, void *data)
+{
+	int ret = 0;
+	struct emac_priv *priv;
+
+	priv = container_of(nb, struct emac_priv, freq_transition);
+	if (priv->coal_intvl != 0) {
+		if (val == CPUFREQ_POSTCHANGE) {
+			if (emac_bus_frequency != clk_get_rate(emac_clk)) {
+				struct ethtool_coalesce coal;
+
+				emac_bus_frequency = clk_get_rate(emac_clk);
+
+				priv->bus_freq_mhz = (u32)(emac_bus_frequency /
+						1000000);
+				coal.rx_coalesce_usecs = (priv->coal_intvl
+						<< 4);
+				ret = emac_set_coalesce(priv->ndev, &coal);